Specifications

247 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
The fixed color tab
The functions on this tab define the profiles fixed color controls (e.g. colors mounted on a color
wheel). CMY and RGB functions must be defined via the CMY & RGB tab.
The fixed color control tab
Fixture color control
Color 1 and Color 2 (dynamic functions)
The color 1 and 2 function is intended to be used with selection of colors. Both have the option of
having an associated palette.
Color 3 & 4 (dynamic functions)
The primary purpose of the color 3 and color 4 functions are to control color related functions other
than direct color selection. The functions do not have an associated palettes.
Some fixtures may have combined functions on one control channel, for example fixed color selection
and continuous color rotation on one channel. In this case it is possible to 'share' the same control
channel between 2 controls. For example :
Fixture has color control channel offset at 4. Color selection is from DMX value 0 to 200 and values
over 200 sets continuous color wheel rotation.
Enable the color 1 control and set the DMX offset to 4 and set min and max values to 0 and 200
respectively (and create the palette).
Also assign color control 3 to offset 4 and set min and max values to 201 and 255 respectively.
The two controls now shares the same control channel, but since color control 3 control is limited to
the high interval it will control color wheel rotation only.
See also defining the generic fixture 2 profile, dynamic functions , user definable palettes
The CMY & RGB tab
The functions on this tab define the profiles CMY and RGB color functions. To define other color
functions use functions on the fixed color tab.