Specifications

230 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
Defining Scanner 1 gobo control
Scanner 1 profile - gobo tab
Use this dialog to set up gobo control definitions for the Scanner 1 profile.
Scanner 1 gobo control
Notes
The Scanner 1 profile gobo control supports one single 8-bit Gobo control channel. It also supports a
user definable Gobo palette with a maximum of 16 gobos, using standard Windows bitmaps (BMP
files).
Enable Gobo Control - to enable the Gobo control function for the profile, check this option.
Gobo Channel offset - use this field to set the DMX channels offset needed to control fixture's Gobo
function. Note that offset values starts at 0 for the fixture's first control channel.
The Gobo palette
To define Gobo palette entries first highlight the appropriate Gobo palette line. Then select the Gobo
bitmap for the palette button by clicking get bitmap. Set the corresponding DMX value by entering
the value in the Palette DMX value field and click Set Value. Clear palette entries by highlighting the
lines and click Clear Entry. A DMX value of -1 indicates that the palette button is unused. Note that
when selecting a bitmap file for the palette button, the selected file must be present in the Windows
folder that is selected by default.
Only palette buttons with defined values will appear on the gobo control.
See also defining the Scanner 1 profile, creating custom bitmaps for palette controls