Specifications

229 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
Defining Scanner 1 color control
Scanner 1 profile - color tab
Use this dialog to set up the Color control definitions for the Scanner 1 fixture.
Example of scanner 1 color control
Note: The Scanner 1 color control supports one single 8-bit color control channel. It also supports a
user definable color palette with a maximum of 16 colors, using RGB colors or standard Windows
bitmap files (.BMP).
Enable Color Control - check to enable the color control function for the profile.
Color Channel offset - use to set the DMX channels offset needed to control profiles color function.
Note that offset values starts at 0 for the fixture's first control channel.
The color palette
To define color palette entries first highlight the appropriate color palette line. Select the color or
bitmap for the palette button by clicking either get color or get bitmap. Finally, set the
corresponding DMX value by entering the value in the Palette DMX value field and click Set Value.
Clear palette entries by highlighting the lines and click Clear Entry. A DMX value of -1 indicates that
the palette button is unused. Note that when selecting a bitmap file for the palette button, the bitmap
file must be present in the windows folder that is selected by default.
Only palette buttons with defined values will appear on the color control.
See also defining the Scanner 1 profile, creating custom bitmaps for palette controls