Specifications

228 LightJockey Help file - (C) Martin Professional 2010

LightJockey Help

Use these fields to set the DMX channel and values needed to control the fixture's intensity function.

The offset value represents the control channel used to control the intensity function on the fixture -

note that offset values starts at 0. The intensity min value represents the DMX value where the fixture

has minimum light output, the intensity max value represents the DMX value where the fixture has

maximum light output. Note that the minimum value must be smaller than the maximum value for the

intensity control to work.

See also defining the Scanner 1 profile

Defining Scanner 1 pan & tilt control

Scanner 1 profile - pan & tilt tab

Use this Dialog to set up the Pan and Tilt control definitions for the Scanner 1 profile. The scanner 1

profile only supports 8-bit Pan and Tilt control.

Note: In order for the profile to use the Pan/Tilt position control, pan and tilt must be controllable on

two individual 8-bit control channels. Furthermore the profile must have valid pan/tilt DMX values from 0

to 255.

Enable Pan/Tilt Control - checking this option allows the fixture to use the standard pan/tilt position

control. This is the only position control available for the scanner 1 profile.

Pan/Tilt Channel offsets - use these fields to set the DMX channels offsets needed to control the pan

and tilt functions of the fixture. Note that offset values starts at 0 for the fixture's first control channel.

Enable position presets - checking this option allows the profile to use the LightJockey's position

presets.

Enable Movement macros - checking this option allows the profile to use the movement macros

associated with the pan/tilt control.