Specifications

226 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
profile functions including the optional features may be defined, see defining the Scanner 1 profile
Defining the Scanner 1 profile
Note : The scanner 1 profile is provided for backwards compatibility only - new profiles
should only be created using the generic fixture 2 profile.
In order to use the profile to control the fixture, it is necessary to define the fixture's control channels,
and optionally color and gobo palette values. Open the Scanner 1 profile definition dialog by right-
clicking on the fixture icon on the desktop and selecting Define Fixture Profile from the popup
menu.
Scanner 1 profile definition dialog
Defining the scanner 1 intensity control
Defining the Scanner 1 pan and tilt control
Defining the Scanner 1 color control
Defining the Scanner 1 gobo control
Defining the Scanner 1 level controls
The File Menu
Save Profile - this will save the current profile to a file. The profile can then be reused when configuring
multiple fixtures of the same type by first configuring a generic scanner 1 and then load the profile for
the individual fixtures. Changes to profiles are not dynamic, saving a profile will not automatically
update other profiles.
Load Profile - this will load a previously saved profile into the current fixture.
Clear Profile - this will clear the contents of the current profile.
LightJockey defaults the file path to the following folder <LightJockey
Installation>\User\UserFixtures\<filename.SS1>
Defining Scanner 1 intensity control
Scanner 1 profile - Intensity tab