Specifications

208 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
Tab Options - Set Tab Size. Select to customize the size of the individual tabs.
Tab Options - Tab Colors. Select to customize background and text colors (check Enabled to use
customized colors)
Show user keys - If disabled, the control will not show the contents of the user keys leaving more
space for the matrix keys.
Wrap User Key text - When enabled the control will try to fit the complete text for each of the user
keys by wrapping the text inside the button area. When disabled, only one line of text is shown pr.
button and the text may be cut.
Wrap Matrix text - When enabled the control will try to fit the complete text for each of the matrix
keys by wrapping the text inside the button area. When disabled, only one line of text is shown for
latch and flash text respectively and the text may be cut. Note that wrapping the text does not
guarantee that the text fits into the button.
Always split matrix buttons - Normally text within matrix buttons is only split in an upper and lower
part if the button contains both a latch and a flash text. Enable this option to force the button to
always split the text into an upper (latch text) and lower (flash text) part.
Matrix button info -Enable. When the matrix button info is enabled the lower part of the 2532 control
shows the contents of the selected matrix button in the two panels below the user keys and matrix. If
the function is disabled the panels are removed.
Matrix button info - Show at Mouse cursor. Shows info for the matrix button under the mouse cursor.
Matrix button info - Show at Mouse cursor. Shows info for the currently selected (highlighted) matrix
button.
Function-List
Calls up the list of functions. Assign the functions to keys by dragging them from the list to the key.
Printing the 2532 configuration
To print out the current user key functions and page layouts select Options -> Print Layout.
2532 layout print dialog
Select to print out the user keys and page layouts by checking each item in the list. Click Print to
start printing. If more than one printer is connected to the PC a different printer may be selected from
the list at the top of the dialog. To select a particular printer, select Setup -> Printer.
Note that the printout uses the wrap and split options selected in the preferences menu.
Emulating the 2532
It is possible to emulate the latch and flash functions of the 2532 by using the 2532 Control, mouse
clicks and/or keyboard hotkeys.