Specifications

190 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
Preferences tab
Fingers preferences
Fader flicker threshold value
To avoid value flicker on the faders from the analogue to digital conversion, Fingers implement a filter
that requires the value change for the fader to be above a certain threshold value. By default the
threshold value is 4, which means that any change in fader value must be at 4 or higher to register.
Fader changes to 0 and 255 (full) always registers regardless of threshold value. The threshold value
may be lowered to 2 or 3, but be aware that this may cause fader values to flicker on some physical
units.
[Page] and [Shift] options
Page and shift options refer to how the buttons, faders and jog wheels work in combination with shift
and page (A,B,C,D) buttons.
It is possible to expand or restrict the number of possible combinations by enabling shift and page
selections for each group of controls.
Enable [Shift] latch - latches the shift state - to release a shift state, press the button a second time
(shift is always latched on the virtual Fingers)
Enable F1-F10 shift select - enables the F1 to F10 buttons to be configured according to shift state.
Enable Fader/slot shift select - enables the faders and slot buttons to be configured according to shift
state
Enable Fader/slot page select - enables the faders and slot buttons to be configured according to
page selection
Enable jog-wheel shift select - enables the jog-wheels to be configured according to shift state
Enable jog-wheel page select - enables the jog wheels to be configured according to page selection
Enable scroll button shift select - enables the scroll buttons to be configured according to shift state
Enable scroll button page select - enables the scroll buttons to be configured according to page
selection
Set Default - sets the default shift/page selection options. By default, only fader/slot page select and
scroll button shift select are enabled.
For more information on the effect of shift and page selection see fingers controls overview
Fingers Status Display - settings relates to the status panel
Large status panel - uses the large status panel
Stay on top - forces the status panel to stay on top of other windows
Show on startup - automatically shows the status panel at startup
Other Settings
Disable Multi Select mode - disables multi select mode.