Specifications

169 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
Merge mode
When a static entry in merge mode is activated its output is merged into the existing static output
using LTP priority (latest takes precedence).
Replace mode
When a static entry in replace mode is activated, it may automatically replace (deactivate) one or
more of the other static entries. The exact entries to be replaced is determined by the statics replace
matrix (click Replace-matrix on the statics control to access the matrix).
Statics replace matrix
The matrix contains a horizontal and a vertical entry for each static entry. To setup the replace pattern
click the corresponding cell for the static entries horizontal line. Entries to be replaced by each static
are marked with an 'X'. Click the cell to toggle the X on and off - right click the leftmost or top most
gray cell to set or clear replace status for an entire row or column.
Note: for static entries currently not in replace mode, the replace indicator (X) will be grayed out
indicating that it has no current function.
Example:
In the matrix above, the first 4 entries all contain static entries for 'strobes'. Each of the entries are
switched to replace mode and are set to replace each other. The effect is that activating either of the 4
strobe entries will automatically deactivate any of the 3 other entries, so only one entry can be active
at any given time.