Specifications

155 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
List of cue lists
To load a previously saved cue list into the cue list control, double click the cue list in the list or right
click the line and select Load Cuelist. To sort the list by the contents of any column, click the
column header. To delete a cue list file, highlight the list right-click and select Delete Cuelist File
from the popup menu.
Dedicated hotkey functions are available for next, previous and start functions.
Cue list commands
Assign commands to the cue list by highlighting one or more lines, then right click and then select
the command from the popup menu.
Selecting commands from popup menu
Most commands have specialized parameters associated - to set or edit the parameters, highlight the
line(s) and modify the parameters through the edit panel.
Editing command parameters
Audio CD Commands and parameters
The CD commands are used to control the audio CD playback via CD-ROM drive.
Wait CD - Instructs the cue list to wait for a specific time code from the Audio CD. Parameters are
Minutes (0-99), Seconds (0-59) and Frames (0-74). Command is ignored in Manual Mode.
CD Play From Track - Instructs the CD-ROM drive to start playback from a given track. Parameter is
track number (1-99).
CD Play From Time - Instructs the CD-ROM drive to start playback from a given time code (e.g. in the
middle of a track). Parameters are Minutes (0-99), Seconds (0-59) and Frames (0-74).
CD Stop - Instructs the CD-ROM drive to stop playback. No parameters.
DA Commands (Digital Audio Commands)
Commands associated to Digital Audio played back via Winamp.
Wait DA - Instructs the cue list to wait for a specific time code. Parameters are Hours (0-23), Minutes
(0-59), Seconds (0-59) and Frames (0-99). Command is ignored in Manual Mode.
Play DA File - Loads and plays Digital Audio file. Parameter is filename - click on the edit
panel to open the file dialog and select the file.