Specifications

9 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
8. Drag the Cyan fader to 0%. Drag the Magenta fader to 100%.
9. Click Add Scene in the Sequence dialog.
10. Drag the Magenta fader to 0% and the Yellow fader to 100%.
11. Now you need to change scene 1 to fade out yellow. Scroll to scene 1 of 3 by clicking Next
Scene (not Add Scene) in the dialog.
12. Yellow is already at 0% so you only need to click its O/S/F button to Fade.
13. Click Save Sequence in the Sequence dialog or toolbar.
14. Click the "Clear after Save" and "Add Sequence to Current Cue" boxes in the Save Sequence
dialog.
15. Type "CMY chase" in the name field.
16. Click Save as New Sequence or press Enter. Notice how the CMY faders move once the
sequence has been saved, cleared, and added to the current cue.
Step V: Program movement sequence
The LightJockey features a sophisticated engine for generating pan/tilt movements. The effects engine
is not described here but detailed information is available in the on-line help. In the first two
sequences, both fixtures were programmed together to do the same thing. In this sequence you
program each fixture individually to move in opposite directions.
1. To program "Left" MAC 600, select it and deselect the "Right" MAC 600.
2. If the pan/tilt control window, shown below, is not open, click Movement on the Fixture toolbar.
3. Drag the movement cursor to the middle of the top-right quadrant. Click the Pan and the Tilt O/S/