Specifications

151 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
Trigging sequences in cues
Rather than having a line latch a cue, the cue list may trig one or more sequences in the cue.
Highlight the relevant line (s) and select Set Cure Trig from the right click popup menu. Select one or
more of the 12 sequence slots to be trigged - when the line is executes each of the sequences will be
trigged exactly once, regardless of programmed trig method (auto, manual, audio). The sequence will
be trigged in the programmed loop direction. It is not possible to have a line latch a cue and trig the
cue at the same time.
Setting cue trigs
To remove cues or trig commands from one or more lines, highlight the lines, right click and select
Clear/Clear Cue/Trig (Clear line clears the whole line).
Tip: When using trig from the cue list, make sure to either set the sequence to manual trig in the cue,
or alternatively give it a very long scene time when programming the sequence and then select auto
trig in the cue. If the sequence is set to manual trig, make sure to disable Chase Man in the cue
control otherwise the sequence will start chasing after the first two trigs.
Adding/editing comments
The final column is used for comments or for external program parameters. To set or edit a comment,
highlight the line(s), and edit the comment via the comment field on the edit panel.
Starting and executing the cue list
An active (running) cue list
To start the cue list, click or . Clicking Top will start the cue list executing from
the first line, while clicking Run will start the cue list executing from the selected (highlighted) line in
the cue list. While a cue list is active the Top/Run buttons are both replaced by a STOP button. Click
this to stop the cue list from executing. While active, it is not possible change any of the cue list
lines, and it is not possible to add, insert or delete any lines in the cue list. To modify the cue list, it
must be stopped first (click STOP). Alternatively the cue list can be started from the right click popup
menu, where Run from top and Run from line have same functions as the Top and Run buttons.
"Run to line" has a different function - see below. It is also possible to start the cue list by right
clicking one of the mark buttons (see below), or via hotkey functions During cue list execution the
'active' and 'next' lines are highlighted in gray and blue respectively. The active line (gray) is the line
that has previusly executed; e.g. if the line contains a cue command this cue has been loaded in the
cue control, while the the next line (blue) is the line waiting to execute (for example waiting for a
specific time code or manual go command).
Preferences Menu