Specifications

150 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
example to latch a number of cues with specific timing by a single Go command.
When an active cue list is waiting for a manual go, it is possible to jump directly to a different line by
right-clicking the desired line and selecting Jump to this from the popup menu.
Assigning commands to lines
To assign a specific command to one or more lines, highlight the line(s), right click and select the
command from one of the submenu's on the popup menu.
Selecting commands from popup menu
Once a command has been used it will appear on the 'recent commands list' on the command panel.
The buttons stores the 8 commands that have been most recently used. Clicking a command button
is similar to selecting the command from the popup menu. Right click the button to clear the
command from the recent commands list. To remove commands from one or more cue list lines,
highlight the lines, right click and select Clear/Clear Command (Clear line clears the whole line).
See cue list commands for details on individual commands and parameters.
Assigning parameters to commands
Most commands require a parameter to function, i.e. a 'CD Play Track' requires a track parameter
(track number) or a 'Wait for CD at' command requires a time code to wait for. Once a command has
been set on a line the required parameters (and comments) may be set via the edit panel at the
bottom of the control. To edit the parameters, highlight the required line(s) and edit the parameters. If
several lines are highlighted, only lines with identical commands will have their parameters changed.
Editing a CD wait time
See cue list commands for details on individual commands and parameters.
Assigning cues to lines
Assign a cue to be latched by the cue list line simply by dragging it from the list of cues to the cue
list line. To add the same cue to multiple lines, load the cue then highlight the lines and select Set
Current Cue from the right click popup menu.
Both transparent and non-transparent cues can be assigned to a line. To latch multiple cues (one
non-transparent, the rest transparent) to the same time code (or by the use of a single Go command),
simply add multiple lines with auto advance and without any time code or other commands.
Remember that non-transparent cues overwrite all slots in the cue control so make sure to add the
non-transparent cue BEFORE the transparent cues.
Latching multiple cues