Specifications

130 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
Notes: The cue stack capture command is primarily useful for installations using remote access such
as the 2532 to load cues. Using cue stack capture allows the user to build the cue stack from cues
using the 2532 load cue commands.
Preferences Menu
View Menu
Default View - resize the cue builder to default size.
Cue Preset - enable or disable the cue preset
Cue Stack - enable or disable the cue stack
Cue Preset Menu
Default Enable Sequence Capture - enable the sequence capture by default.
Force Sequence Reload - if disabled, sequences transferred to the current cue will not restart if the
slot in the current cue is already occupied by the same sequence. If enabled, the sequence will
always restart regardless of the contents on the cue.
Auto Clear Sequences on Go - all sequences are cleared from the cue preset when the GO command
is executed.
Cue Stack Menu
Default Enable Cue Capture - enable cue capture by default.
Auto Clear Stack on Go - the cue stack is automatically cleared when a GO command is executed.
View Cue Stack in Cue Preset - when enabled, the resulting contents (sequences in the resulting
cue) of the cue stack are automatically added to the cue-preset. If a GO command is issued for the
cue-preset, these sequences are included in the sequences that are transferred to the current cue.
Note that it is not possible to change trig modes for the sequences from the cue stack in the cue-
preset. When disabled, the cue stack sequences are not transferred to the cue preset. This function
is primarily useful as pre-view for users that uses the cue stack only.
Use Color Code for Transparent Cues - when enabled, transparent cues in the cue stack are shown in
blue in the cue stack (non-transparent cues are shown in black).