Specifications

121 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
Status of individual sequence slots in the cue
Stop - means that the sequence has stopped executing either through user intervention using the stop
button, or simply because the sequence is static and already has executed it's scene. The sequence
will also stop if the loop options has identical first and last scenes (see later).
Disabled - the sequence is disabled.
Error - An error has occurred. The most likely error is that the sequence file has been erased after the
cue was saved with the sequence number. In this case the sequence name will read 'load error'.
Edit - The sequence is currently being edited. When the sequence is being edited it is temporarily
taken out of the cue output. The sequence state will revert to normal when the current sequence is
cleared again. The reason for this state is to avoid that a sequence being edited contributes to the cue
with the 'old' sequence contents (the contents is not really changed until the sequence is saved)
during editing.
Out - The sequence has terminated its loop conditions and is now 'out' - see Sequence slot loop
options
Link - The sequence has terminated its loop conditions and is set to link to another cue - see
sequence slot loop options
Slot color codes
Note: the use of status colors may be disabled through the cue control preferences menu
Black is used to indicate that the sequence is running normally.
Maroon is used to indicate a static sequence or a sequence that has stopped.
Red Indicates Error, such as referencing a sequence that does not exist, or to indicate that a manual
sequence is in chase mode.
Gray is used to indicate a disabled sequence.
Blue is used to indicate a sequence that is currently being edited
Green is used to indcate a 'link-cue' sequence in edit mode.
Modifying sequence slot labels
Sequence slot labels
To facilitate systematic cue programming the individual sequence slots of the cue may be labeled.
Note that the slot label is only visible in the cue control when the sequence slot is empty. To label a
slot, select Sequence Slot Labels from the preferences menu in the cue control.
Sequence slot label dialog