Specifications

115 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
present on a page (when re-saved) it will not be added a second time; if it is present on a different
page than the one specified it will not be removed from the original page.
Click to save the current cue to a new cue file (and assign a new cue number).
Both new cues and cues that has previously been saved may be saved as new a cue. If an already
existing cue is saved as a new cue, the old, original cue is left intact (much like saving a document
with a new filename in a word processor).
Click to re-save a cue that has previously been saved. Saving the cue will overwrite
the contents of the original cue file.
Click to save the current cue to be saved with a specific cue number of the users
choice through the save as Cue# dialog.
Save as Cue# dialog
Clicking Save As Cue # brings up the save as cue dialog. Type the new cue number in the Cue# field
- if an existing cue is already registered with that cue number, the name of the cue will show up in the
cue name field. Warning : If a cue using this number ready exists, saving the current cue will
overwrite the existing cue with the current cue - there will be no further warnings if an already existing
cue is overwritten.
Preferences Menu
Auto Close - this option will close the save dialog automatically when the cue is saved.
Save on [Enter] - this option will allow the [Enter] key on the keyboard to act as a hot-key for the
Save Cue and Save as New Cue buttons.
List of cues
Use this list to retrieve previously saved cues or to drag cues to various configuration settings (do not
confuse the list of cues with cue lists).
The list is opened by clicking on the icon on the right hand side of the sequence/cue tool bar or
the cue control.
The list of cues
The list contains two sections - the global cue list and the cue pages. The global list contains all
previously saved cues, while the cue pages contains user defined pages with any of the cues from the
global list in any order. By default the control defaults to showing the global list only. Make the global