Specifications

100 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
Control for Jem ZR 24/7 hazer
The smoke control
The smoke control is accessible via on the fixture tool bar. The smoke control allows
immediate control of DMX compatible smoke machines and hazers independently of programming. To
utilize the smoke control the smoke machine(s) or hazer(s) must be configured using the DMX smoke
machine or DMX hazer profiles. The smoke control takes control of all DMX smoke machines or
hazers that are configured using these profiles. Once configured, the smoke machine or hazer can be
programmed as any other fixture, or it may be controlled independently via the smoke control
overriding any programs.
Note that with some built-in profiles such as Jem Roadie X-treme, smoke level and output is controlled
via the smoke control, while fan level is controlled by the hazer control - please refer to fixture notes.
The smoke control
Smoke machine control
The Smoke control has two parts - the left part controls smoke machines by emulating a smoke
machine remote control - the right side is used to set a continuous level of haze on a DMX hazer
without the need to program the smoke level into scenes or the default DMX output.
Smoke Button - clicking and holding Smoke will instruct the smoke machines to smoke for as long
as it is held down.
Using the timer
Timer - enables and disables smoke controls automatic cycle function.
Cycle - the cycle time is represented by the cycle fader and has 32 different levels, ranging from 5
seconds to 60 minutes. When the timer is enabled, the control will repeat the cycle continuously.
Duration - the duration fader sets the length of time in which the smoke machine is instructed to
smoke once every cycle, at the end of the cycle.
Level - the level fader represents the output level at which the smoke machine is instructed to smoke.
Reset- Clicking Reset resets the cycle time, and restart the cycle.
The small vertical bar in the right hand side of the smoke control illustrates the cycle time (total
height), the duration (white part of the bar) and the elapsed cycle time (red line). During activation of
smoke output, either via the smoke button or via the timer function, any smoke levels programmed