Specifications

97 LightJockey Help file - (C) Martin Professional 2010
LightJockey Help
Lamp control for user defined profiles
See also fade state buttons, lamp controls for built in profiles
Reset control
Resetting fixtures, built in profiles
A reset command instructs the fixture to re-align their mechanical parts to the default position and
possibly also it's internal 'logic'. While resetting, fixtures will not respond to any commands.
Immediate reset command
For most built in profiles there are two ways to send a reset command to the fixture. Send an
immediate reset command by selecting the relevant fixtures, then click on the fixture tool bar.
Programmable reset command
Programmable reset control
To include a reset command in a scene see extended controls for built in profiles. Note that when a
reset command is programmed the following warning will appear - click yes to include the reset
command.
Programmable reset warning
See also resetting fixtures, user defined profiles
Resetting fixtures, user defined profiles
A reset command instructs the fixture to re-align their mechanical parts to the default position and
possibly also it's internal 'logic'. While resetting, fixtures will not respond to any commands. Note that
not all fixtures and profiles support reset commands through DMX (please refer to fixtures
documentation).
Immediate reset command
Send an immediate reset command by selecting the relevant fixtures, then click on the fixture
tool bar. The immediate reset command does not get stored in any sequence.
Programmable reset command
To include a reset command in a scene, use one of the control channels usually exposed in extended
controls for user defined profiles - please refer to fixture protocol documentation for exact control
channel and DMX value for reset command.