User manual

22 RUSH MH 4 Beam User Manual
2. Press ENTER, then use the DOWN and UP buttons to select EXIT or
RESET TIME. EXIT returns to the previous menu without changing the
remaining time. RESET TIME restarts the timer countdown at the number
of hours defined in INTERVAL.
3. Press ENTER to confirm or press MENU to exit.
Factory settings
The fixture’s factory default settings can be restored using FACTORY
SETTINGS.
Effect home position (offset) adjustment
The fixture’s effects (pan, tilt, shutter, color, gobo, prism, rotating prism and
focus) can lose their home position if the fixture is exposed to shocks, for
example. To adjust the effect’s home position:
1. In the menu structure, press ENTER and hold for at least 3 seconds to
enter the OFFSET MENU.
2. Use the DOWN and UP buttons to choose the effect that needs to be
adjusted. Press ENTER to select it.
3. The effect’s currently indexed home position will flash in the display. Use
the DOWN and UP buttons to adjust it.
4. Once the correct position has been reached, press ENTER to set this (or
to return to the previous menu level without making a change, press
MENU).