Product Manual

2-2:
2-3:
❸
●
❹
Pull wheel from axel
While maintaining leverage with pick/pin, use the other hand on the inside of the
wheel to slide the wheel away from the can. If the pin is disengaged from the axle
you should have no difficulty in removing the wheel. If the wheel is not disengaging
you may have to readjust your pick/pin.
For 6" - 8" Wheels
For 10" - 12" Wheels
Apply leverage
With the pick, apply leverage to the bottom side of the locking pin’s flange. It may
be helpful to use a pick/pin with a slightly curved or bent tip.
For 6" - 8" Wheels
For 10" - 12" Wheels
Place the new wheel on the axle - push in until you hear a click.
Depending on the measurement you took, apply 1 to 3 spacers evenly to both
Each wheel comes with three ½” spacers.
wheels (This provides wheel clearance so
the wheel does not come in contact with
the side of can).