Manual

Begin by taking Part & , position
them as shown above. Insert part
between & .
Secure by inserting the [4] 6x25mm bolts
(Part ) through the inside back through
to the outside and thread into Part .
Tighten to secure.
Attach Stool seat to stool assembly by
laying the seat onto the floor and place the
stool assembly over it.
Secure with [4] 6x35mm bolts (Part ).
Tighten down to secure.
Double check that all bolts are tightened.
Once that is complete Turn your stool
over onto its legs and use.
Stool Assembly Instructions
24
24
24
24
28
28
28
28
29
29
29
24
28
29
29
3
32
32
30
30
31
31
30
31
9
10/2011 - RPI
4444 Lawton Street, Detroit, MI 48208 USA / Tel: [phone] / Fax: [phone]
E-mail: [e-mail] / www.MartinUniversalDesign.com
IMPORTANT:
If you have difficulty assembling your U-DS92ST Creative Center or need customer service assistance. Please call: Martin Universal
Design, Inc. Customer Service Hot Line at 1-313-895-0700. If you need additional parts, it is not necessary to contact your dealer, our
Customer Service Rep. will forward them to you immediately.
6 X 25MM BOLT
SEAT STOOL LEG
6 X 35MM BOLT
STOOL LEG FOOTRING
Ashley - Hardware Parts List
: Table Components
: Fasteners and Tools
4444 Lawton Street, Detroit, MI 48208 USA
TEL: [phone] FAX: [phone]
www.MartinUniversaldesign.com
Email: [e-mail]
25
Ashley - Hardware Parts List
: Table Components
: Fasteners and Tools
4444 Lawton Street, Detroit, MI 48208 USA
TEL: [phone] FAX: [phone]
www.MartinUniversaldesign.com
Email: [e-mail]
25
3 30 31 32
: TABLE COMPONENTS
: FASTENERS AND TOOLS
24 28 29