User guide

4444 Lawton Avenue, Detroit, MI 48208 USA Tel:[phone]/Fax:[phone]
Email: [e-mail] visit us at www.MartinUniversalDesign.com
NEW U-DS90W/U-DS90B Creation Station
Drawer Assembly Instructions
IMPORTANT
If you have difficulty assembling your U-DS90W Drawers or need customer service assistance.
Please call: Martin Universal Design, Inc. Customer Service Hot Line at 1-313-895-0700.
If you need additional parts, it is not necessary to contact your dealer,
our Customer Service Rep. will forward them to you immediately.
Drawer Parts & Quantity (makes 2 Drawer Banks)
Top - 2 Pieces Inside Section - 2 Pieces Drawers - 6 PiecesBottom - 2 Pieces
A B
C
D
A
D
C
B
After proper assembly
the drawers should look
like the above illustration.
Part W
WARNING: READ ALL INSTRUCTIONS FIRST BEFORE ASSEMBLING DRAWERS.
ONCE PIECES ARE SNAPPED TOGETHER THEY ARE SECURED.
Assemble your drawers by
taking the section [A] and
snapping into place -
by lining up the tabs with the
grooves in the outside edge
of section piece [B].
Complete by snapping
section [C] onto section A&B.
Finish by sliding the
[3] Drawers into the
drawer bank assembly.
Revised AUGUST 09