User Manual

ManualsBrandsMartin Universal Design ManualsSports and recreationU-9601 LEGACY FAMILY EASEL

Rev June 08 RPI

Martin/F. Weber Co. • 4444 Lawton Avenue, Detroit, MI 48208 USA

Tel:(313)895-0700 • Fax:(313)895-0709 • E-mail:Custservmud@aol.com

www.MartinUniversalDesign.com • www.weberart.com

Made in China

U-9601

ASSEMBLY INSTRUCTIONS

Summary of content (4 pages)

PAGE 1
U-9601 ASSEMBLY INSTRUCTIONS Martin/F. Weber Co. • 4444 Lawton Avenue, Detroit, MI 48208 USA Tel:(313)895-0700 • Fax:(313)895-0709 • E-mail:Custservmud@aol.com www.MartinUniversalDesign.com • www.weberart.
PAGE 2
U-9601 • LEGACY FAMILY EASEL ASSEMBLY INSTRUCTIONS NO TOOLS NEEDED MAKE SURE CARTON CONTAINS THE FOLLOWING PARTS HARDWARE PARTS WOOD PARTS Quantity ....... Description 1 ea......... Chalkboard Surface 1 ea......... White Drawing Surface 2 ea......... Upper Legs with Hinges 2 ea......... Lower Legs with Channel 1 ea......... Materials Tray 1 ea. ....... Cross Supports 1 ea......... Paper Roll Holder ID# [A] [B] [C] [D] [E] [F] [G] Quantity ........ Description ID# 4 ea. .............
PAGE 3
STEP 1. Assembling Legs. Take each Upper Leg [C] (make sure hinges are positioned on top) along with each Lower leg [D]. Insert a 2” Bolt [ I ] through inside of upper leg and through lower hole and then through channel of lower leg part [D]. See FIG 1. Secure with washer [K] and wing nut [J] provided. See FIG 1B zoom. Repeat on all 3 remaining legs. Note: Channel in lower portion of leg is for height adjustment of easel. STEP 2. Assembed Legs.
PAGE 4
STEP 5. Attaching the Surfaces The images below show how the wooden knobs [M] on all four bolts should look after proper assembly. See FIG 5. REPEAT STEPS 3 - 5 for the White Drawing Surface. Please Note the White Drawing surface is the shiny white side. This side would face the outside of the easel. This image is the lower portion of the surface. FIG 5 A STEP 6. Attaching Material Tray [E] NOTE: 2 People needed for this step.