User manual

26 MAC 2000 Performance II
amount of cyan from the color mixing system, which will diffract to give both cyan and white color shifts as
the image animates.
Fire effects
The range of animation wheels available for the MAC 2000 Performance II is very versatile in producing fire
and flame effects. Good results may be obtained from many of the designs together with any standard flame
or fire gobo designs.
Here are a few ideas to get you started:
B
LOWING FLAMES
As with any animation effect, the rotation speed and image focus will have a great effect on the final
projection, so these parameters should be experimented with. With all fire and flame effects, it is possible to
add an amount of magenta (approximately 70%) and yellow (approximately 90%) from the color mixing
system, which will diffract to give orange, yellow and red color shifts as the image animates.
R
ISING FLAMES 1
As with any animation effect, the rotation speed and image focus will have a great effect on the final
projection, so these parameters should be experimented with. With all fire and flame effects, it is possible to
add an amount of magenta (approximately 70%) and yellow (approximately 90%) from the color mixing
system, which will diffract to give orange, yellow and red color shifts as the image animates.
Alternative gobos: Alternative animation discs:
Any of the fire or flame gobos from the standard range
could be used in substitution for the above suggestions.
Elliptical Breakup gives an irregular movement
Dot Breakup
Alternative gobos:
Any of the fire or flame gobos from the standard range
could be used in substitution for the above suggestions.
Gobo 175
Gobo 176
Spiral breakup disc
and one of the
following
Tangential breakup disc
and one of the
following
Gobo 175
Gobo 176