Operating instructions

40 61D0008

Item Part No. Description

1 GD36PBA Optional 36" polished brass bifold glass door kit; polished brass nish frame; tempered

clear glass

1 GD36BA Optional 36" black bifold glass door kit. black nish frame; tempered clear glass

1 GD36SSA Optional 36" stainless bifold glass door kit; stainless nish frame; tempered clear glass

1 GD42PBA Optional 42" polished brass bifold glass door kit; polished brass nish frame; tempered

clear glass

1 GD42BA Optional 42" black bifold glass door kit; black nish fram; tempered clear glass

1 GD42SSA Optional 42" stainless bifold glass door kit; stainless nish frame;tempered glass is clear.

2 SCS Chimney support (Required when chimney height exceeds 30')

3 SE30 Elbow offset/return package containing two 8" diameter 30° elbows

4 612 0 to 6/12 variable pitch roof ashing; one 612 ashing required with SC round chimney cap

on 0 to 6/12 pitch roof

4 1212 6/12 to 12/12 variable pitch roof ashing. One 1212 ashing required with SC round

chimney cap on 6/12 to 12/12 pitch roof

5 SC Round chimney cap for contemporary installation; includes storm collar

6 SF 14

/2" restop spacer. One required at each ceiling or oor level

7 H1652 16"x52" hearth extension for protecting oor against sparks and radiant heat

7 H2066 20"x66" hearth extension for protecting oor against sparks and radiant heat

8 AK4 4" diameter outside combustion air kit; allows air from outside to enter replace (For

residential homes)

8 AK6 6" diameter outside combustion air kit; allows air from outside to enter replace (For

manufactured homes)

9 FP4U 4" diameter x 8' long exible uninsulated combustion air duct (Use with AK4 kit)

9 FP6U 6" diameter x 8' long exible uninsulated combustion air duct (Use with AK6 kit)

10 403 4" duct connector for splicing FP4U ducts; includes one connector and two clamps

10 603 6" duct connector for splicing FP6U ducts; includes one connector and two clamps

11 FA2A Optional fan kit, with switch; FA2 fan installs under rebox bottom; removal of brick is

required; install JB1 junction box at the time the replace is installed if the FA2A Fan is to

be installed at any time.

12 R3672 36"x72" at chase ashing with single ue hole

12 R4884 48"x84" at chase ashing with single ue hole

13 CF8 Terra Cotta masonry-look termination chimney cap for chase installation; use with VFK

ashing kit

14 S48 48" long x 8" diameter chimney ue section

14 S36 36" long x 8" diameter chimney ue section

14 S18 18" long x 8" diameter chimney ue section

14 S12 12" long x 8" diameter chimney ue section



REPLACEMENT PARTS