Operating instructions

61D0008 31
8"
47"
54"
1
1
/2"
max.
12"
12"
max.
42
1
/2"
TRIM AND MANTEL INSTALLATION FOR GAS APPLIANCES
Mantel Trim Installation (Unvented Gas Appliances Only)
The replace face may be left exposed or trimmed. If trim is installed, fasten it securely to face of replace. Trim materials
must not extend closer than
3
/8" to the vertical edge of replace opening if you plan to use glass doors.
1. Install hood on replace with mantels 12" from the
opening of replace. Mantel may be no more than
12" deep. Combustible framing members may be
placed across top spacers. See Figure 38.
2. Combustible mantel and/or trim may be installed
within shaded area in Figure 39. Use only non-
combustible materials below top of spacers and
behind front face.
Note: These instructions are for acceptable combustible mantel location in . See

Hood (p/n 075629) must be installed when
mantel is 12" from replace opening.

using hood.
WARNING




Top Spacers
Note: No
combustible
materials

of opening.
2¾" Hood
(p/n 075629)
Non-combustible
Wall Board
Shaded
Area