Instruction Manual

Rotational Vacuum Concentrator RVC 2-33 IR
8 Maintenance and service
60
Version 08/2009, Rev. 2.1 of 02/12/2014 • sb
Translation of the original operating manual
Remove the cable cover at the bottom of the unit.
6 Cable cover
Fig. 53: Removing the cable cover at the bottom of the unit
The cables of the electronic temperature measurement system of the shaft
can be seen now.
Unscrew the two terminal screws of the electronic temperature
measurement system of the shaft.
7 Terminal screws
Fig. 54: Removing the terminal screws of the electronic temperature measurement system
Turn the rotational vacuum concentrator back to its normal position
(with a sufficient number of people helping you), if it was turned upside
down.