Instruction Manual

Rotational Vacuum Concentrator RVC 2-33 IR
5 Set-up and connection
Version 08/2009, Rev. 2.1 of 02/12/2014 • sb
29
Translation of the original operating manual
Pos: 99 / 200 Christ /37 1 RV C-BA (PROJE KTE )/R VC 2-3 3 IR/ 050 Au fst ellu ng u nd Ans chluss / 050-00 50 Opt io n: Dr uckst eue rventil und Vak uumm esss onde RV C 2-3 3 IR @ 31\ mod _14 074 8406654 1_6 8.d ocx @ 2090 42 @ 2 @ 1

5.5 Option: Pressure control valve and vacuum sensor
If a pressure control valve and a vacuum sensor are used, they must be
installed between the rotational vacuum concentrator and the vacuum
pump, and they must be connected to the marked IEC C14 connector at
the back of the unit (see chapter 2.1.1 - "Functional and operating
elements").
NOTE
Observe the installation direction of the pressure control valve!
1 Vacuum sensor
2 Pressure control valve
Fig. 8: Installation of the pressure control valve and the vacuum sensor
Pos: 100 /01 0 Uni v ersal mod ule/S eit enwec hsel @ 0\m od_ 120 211 624 4312 _0. docx @ 10 5 @ @ 1