Owner manual

RVC 2-25 CD&
6 Operation
46
Version 11/2008, Rev. 2.2 of 04/12/2013 • sb
Translation of the original operating manual
Use the up/down keys to scroll through the sections. The section to be
edited is in the middle column of the table.
Press the right-hand function key "edit" to confirm. The editing menu is
displayed.
Fig. 36: Program section menu
In this menu, the set values of the selected section can be changed, the
selected section can be deleted, or a new section can be added to the
selected section.
Confirm the input and quit the menu.
Copying a program
Select "Copy program" from the program administration menu and
confirm. The program list will be displayed.
Select a program and confirm. A copy of the selected program will be
created in a free program location.
Deleting a program
Select "Delete program" from the program administration menu and
confirm.
Select a program from the program list and confirm. A message will be
displayed:
Abb. 37: Message for deleting a program
Confirm the message and quit the menu.
Program memory informationen
Select "Program memory information" from the program administration
menu and confirm. Information concerning free program locations and
sections are displayed:
Fig. 38: Program memory information
Pos: 146 /01 0 Univ ersal module/ Lee rzeile @ 0\ mo d_12021 162445 00_ 0.docx @ 1 14 @ @ 1
Pos: 147 /01 0 Univ ersal module/ Lee rzeile @ 0\ mo d_12021 162445 00_ 0.docx @ 1 14 @ @ 1
Pos: 148 /20 0 Ch ri st/3 70 RV C-BA (S TA NDA RDMOD ULE )/06 0 B etri eb/C Dpl us/06 0- 0050 -00 30 -003 0 So nde rfun kti on en @ 8\ mod_ 130 993 030 7387 _68 .docx @ 4 7108 @ 4 @ 1