User guide

RVC 2-18 CD& HCL
4 Storage and transport
24
Version 04/2012, Rev. 1.4 of 25/11/2013 • sb
Translation of the original operating manual
Pos: 76 / 200 Christ /37 1 RV C-BA (PROJE KTE )/R VC 2-1 8 CDpl us _2 -18 CD plus_HC l /040 La ger ung und Tr ansp ort/ 040 -0041 Trans portsi c herung HC l @ 1 2\mod_ 133 697 3510 317_68 .doc x @ 6 4439 @ 2 @ 1

4.4 Transport safety device
The rotational vacuum concentrator RVC 2-18 CD
plus
HCl is not equipped
with a transport safety device.
In order to prevent the lid from getting stuck during the transport, several
layers of paper are placed between the lid and rotor chamber.
• The paper must be removed prior to the unit’s start-up.
Pos: 77 /010 Unive rsalm odule/ L ee rzeile @ 0\ mod _120211 624450 0_0.docx @ 11 4 @ @ 1
Pos: 78 / 200 Christ /37 1 RV C-B A (PR OJEK TE) /RV C 2-1 8 CDpl us_2 -18 CD pl us_HCl /040 La gerung und Trans p ort/040 -00 51 Inn erbetri ebl iche r T ranspor t HC l @ 12\m od_133 518 031 151 0_6 8.docx @ 6 292 9 @ 2 @ 1

4.5 On-site transport
• The RVC can be transported by a suitable number of persons who
reach under it from the sides.
CAUTION
The RVC 2-18 CD
plus
HCl weighs approx. 14 kg!
• When lifting the RVC, always reach under it from the side. Do not grab
the unit at the plastic control panel (see figures below).
correct incorrect
Fig. 5: Lifting the RVC
• When setting the unit down, ensure that the feet are upright (see figures
below).
correct incorrect
Fig. 6: Unit feet
• If the rotational vacuum concentrator needs to be transported over long
distances, transport it in suitable packaging, and if at all possible, the
original packaging.
Pos: 79 /010 Unive rsalm odule/ Absc hnittsw echsel @ 0\mod _12 021245 14062_0 .docx @ 4 18 @ @ 1
Pos: 80 /010 Unive rsalm odule/ Seit enwec hsel @ 0\m od_120 2116244 312_0. docx @ 105 @ @ 1