Owner's manual

RVC 2-18 CD&

8 Maintenance and service

Version 04/2012, Rev. 1.3 of 25/11/2013 • sb

Translation of the original operating manual

4 Countersunk screw

Fig. 42: Removing the countersunk screw

• Remove the thrust piece and the compression spring from the axle by

lifting it vertically upward.

• Remove the rotor shaft from the axle by lifting it vertically upward.

Fig. 43: Removing the rotor shaft

• Clean the lid with a disinfectant or cleaning agent.

• Wipe out the rotor chamber and clean it with a cleaning agent or

disinfectant.

• Clean the rotor shaft and the magnetic coupling.