Owner's manual

RVC 2-18 CD&
6 Operation
38
Version 04/2012, Rev. 1.3 of 25/11/2013 • sb
Translation of the original operating manual
Stopping the evaporation process prematurely
If the timer is active, the evaporation process will be stopped automatically
when the preset time is over. The process can also be aborted manually.
• Open the menu "Select mode" with the left-hand function key.
• Select the function "Stop evaporation".
• Press the right-hand function key to confirm.
Fig. 23: Stopping an evaporation process
In order to stop the evaporation process, the chamber is completely
aerated and the rotor is brought to a standstill. Then, the system inquires as
to whether the lid should be opened.
Fig. 24: Message after stopping an evaporation process
Pos: 126 /01 0 Univ ersal module/ Lee rzeile @ 0\ mo d_12021 162445 00_ 0.docx @ 1 14 @ @ 1
Pos: 127 /20 0 Ch rist /3 71 RVC -BA (P ROJE K TE)/R VC 2- 18 CD plus_ 2-1 8 CD plus _HC l/06 0 Bet rieb/ 060 -00 50- 003 0 Ha upt menü R VC 2- 18 CD pl us @ 9\m od_132 0906 561 695 _68 .docx @ 54 117 @ 3 @ 1

6.5.3 Main menu
The main menu can be activated by pressing the right-hand function key
"menu" in the main window. It includes the following submenus:
• Changing the set values for the manual mode (see chapter 6.5.3.1 -
"Changing the set values for the manual mode ")
• Process- & equipment information system (see chapter 6.5.3.2 -
"Process and equipment information")
• Options (see chapter 6.5.3.3 - "Options")
1 Menu list
2 Menu title
3 Focus
4 Scrollbar
5 Function key
„Quit menu“
6 Function key
„Open menu“
Fig. 25: Structure of the main menu
Pos: 128 /01 0 Univ ersal module/ Lee rzeile @ 0\ mo d_12021 162445 00_ 0.docx @ 1 14 @ @ 1
Pos: 129 /20 0 Ch rist/3 71 RV C-BA (PROJ EK TE )/RVC 2-18 CD plus _2-1 8 CD plus _HCl /06 0 Bet rieb/ 060 -00 50-003 0-0 010 S ollw ert e für M anu ellmo dus änd ern RVC 2-1 8 CDpl us @ 9 \mo d_1 320 9066 42387_ 68.d ocx @ 541 24 @ 4 @ 1