Owner's manual

RVC 2-18 CD&
3 Safety
18
Version 04/2012, Rev. 1.3 of 25/11/2013 • sb
Translation of the original operating manual
Pos: 42 / 200 Christ /37 0 RV C-B A (STA NDA RDM ODU LE)/ 030 Si ch erhei t/0 30-006 0 Si ch erhei tshinw ei se- ----- ----- --- ----- ----- --- ----- -- ------ ----- - @ 7\mod_ 1309 331 039 036 _68. docx @ 46 439 @ 2 @ 1

3.6 Safety instructions
Pos: 43 / 200 Christ /37 0 RV C-BA (STAND ARD MO DULE )/030 S ich erh eit/0 30- 0060-0 010 E lektri s che Sic herh eit @ 7\m od_ 130 9331039 396 _68 .docx @ 46 447 @ 3 @ 1

3.6.1 Electrical safety
CHRIST rotational vacuum concentrators are units of safety class I. The
RVCs are equipped with a three-wire power cord and a 230 VAC safety
plug with earthing contact. Please comply with the following points in order
to preserve this safety feature:
DANGER
• Ensure that the local mains voltage matches the nominal voltage that is
stated on the name plate.
• Do not place any dangerous material, e.g. glass vessels containing
liquid substances, within the safety area of 30 cm around the RVC.
Spilled liquids may get into the RVC and damage the electrical or
mechanical components.
• Work on the power supply system must only be performed by certified
electricians.
• Inspect the electrical equipment of the unit regularly. Defects such as
loose or burnt cables must be eliminated immediately.
Pos: 44 /010 Unive rsalm odule/ L ee rzeile @ 0\ mod _120211 624450 0_0.docx @ 11 4 @ @ 1
Pos: 45 / 200 C hrist /37 0 RV C-B A (STA NDA RD MOD ULE )/ 030 Sic herh ei t/0 30- 006 0-0020 M echa ni sche Si c her heit @ 7\ mod_ 130 933 103 975 5_6 8.docx @ 4 645 5 @ 3 @ 1

3.6.2 Mechanical safety
In order to ensure the safe operation of the RVC, please comply with the
following points:
WARNING
• Do not use the RVC if it was installed incorrectly.
• Do not use the RVC without panels.
• Do not use the RVC with accessories that show signs of damage.
• Only use the RVC with accessories that have been approved by the
manufacturer. In case of doubt, contact the manufacturer (see chapter
7.3 - "Service contact").
• Do not hit or move the RVC during its operation.
• Do not lean against or rest on the RVC during its operation.
• Check the RVC and accessories before every start-up for any visible
signs of damage.
• Do not evaporate any substances that could damage the material of
the rotors, rotor chamber or lid of the RVC in any way. Highly corrosive
substances (e.g. hydrogen chloride HCl) damage the material and
affect the mechanical strength of the rotors and accessories.
• Stop the RVC immediately in the event of a malfunction. Eliminate the
malfunction or contact the after-sales service of Martin Christ
Gefriertrocknungsanlagen GmbH (see chapter 7 - "Malfunctions and
error correction").
• Ensure that all repairs are performed only by authorised and
specialised personnel (see chapter 7.3 - "Service contact").
Pos: 46 /010 Unive rsalm odule/ Seit enwec hsel @ 0\m od_120 2116244 312_0. docx @ 105 @ @ 1