Instruction Manual

ManualsBrandsMartin Christ ManualsEquipmentEpsilon 2-4 LSCplus

Freeze-dryer EPSILON 1-4 LSCplus

Freeze-dryer EPSILON 2-4 LSCplus

3 Safety

Version 04/2014, Rev. 1.4 of 09/12/2014 • sb

Translation of the original operating manual

Pos: 52 / 200 Christ /36 0 GT -BA La bor-P ilot (S TA NDA RDMOD ULE) /03 0 Si cher heit 030 -006 0 Sich erh eitshi nw eise +++ ++++ +++ ++++ +++++ ++ +++++ ++ + @ 25\m od_ 140 498 330 2361_68 .doc x @ 1832 85 @ 2 @ 1



3.6 Safety instructions

The following instructions must be observed prior to every drying process:

WARNING

• Ensure that the freeze-dryer was set up and connected properly (see

chapter 5 - "Set-up and connection").

• Connections to customer-provided pipes must be force- and torque-

free.

• Maintain a safety distance of at least 30 cm (12 inches) around the

freeze-dryer.

• Do not store any dangerous goods in the safety area of the freeze-

dryer.

• Do not stay in the safety area longer than what is absolutely necessary

for the operation of the freeze-dryer.

• Only use accessories that have been approved by the manufacturer

(except for commercial vessels made of glass or synthetic materials).

We explicitly warn against the use of equipment of poor quality.

Breaking glass or bursting vessels can cause dangerous situations.

• Observe the instructions on the installation of accessories (see the

separate document).

Pos: 53 / 010 Uni ve rsalm odul e/Leerz eil e @ 0\mo d_1 202116 244 500 _0.doc x @ 114 @ @ 1

Pos: 54 / 010 Uni ve rsalm odul e/Leerz eil e @ 0\mo d_1 202116 244 500 _0.doc x @ 114 @ @ 1

Pos: 55 / 200 Chris t /36 0 GT-B A La bor -Pi lot (S TA NDA RDMOD ULE) /03 0 S icher heit 030 -006 0- 0010 E lekt ri sche Si c her heit @ 25\ mod _14 049833 034 48_6 8.d ocx @ 183 299 @ 3 @ 1



3.6.1 Electrical safety

CHRIST freeze-dryers are units of safety class I. Please comply with the

following points in order to preserve the safety features:

DANGER

• Ensure that the local mains voltage matches the nominal voltage that is

stated on the name plate.

• Do not place any dangerous material, e.g. glass vessels containing

liquid substances, within the safety area of 30 cm around the freeze-

dryer. Spilled liquids may get into the freeze-dryer and damage the

electrical or mechanical components.

• Work on the power supply system must only be performed by certified

electricians.

• Inspect the electrical equipment of the unit regularly. Defects such as

loose or burnt cables must be eliminated immediately.

Pos: 56 / 010 U nive rsalm odul e/S eite nwechs el @ 0 \mo d_1 202116 244 312_ 0.d ocx @ 105 @ @ 1