Manual

Freeze-dryer EPSILON 2-10D LSCplus

6 Operation

Version 04/2013, Rev. 1.5 of 16/12/2014 • sb

Translation of the original operating manual

Access protection (4)

In this dialog box, the access rights can be managed on several levels and

they can be protected with a password.

In the factory setting with an activated access protection, data can be

viewed but not edited.

Fig. 46: Dialog box "Access protection"

NOTE

The other buttons cannot be activated unless the access protection is

active.

Password timer runtime: In order to prevent unauthorised access, the

system will automatically switch back to the default setting after a pre-

defined period of time.

In this case, there is a small lock symbol in the status line and below this

symbol the remaining time until the lock will be active is counted down. At

the same time a button with a big lock symbol will be displayed in the actual

values field.

Fig. 47: Countdown of the password timer and the button with the lock symbol

• The button with the lock symbol blocks the access immediately and the

system switches to the default setting.

Fig. 48: Access blocked, the data cannot be edited