User Manual

Delta 1-24 LSC&

Delta 2-24 LSC&

5 Set-up and connection

Version 04/2013, Rev. 1.2 of 20/02/2014 • sb

Translation of the original operating manual

1 Vacuum sensor

2 Connection socket

Fig. 15: Position of the vacuum sensor and the connection socket

• Switch the unit off by actuating the mains power switch.

• Take the vacuum sensor out of its original packaging and fasten it to the

connector with a clamping ring (DIN16KF) and a centring ring (included

in the scope of supply).

• Plug the connector to the connection socket and hand-tighten the

screws on the connector.

NOTE

It is absolutely essential to comply with the manufacturer’s instructions in

the separate operating manual of the vacuum sensor!

Thyracont VSP62/63

MKS 722B

Pfeiffer TPR 280/281

Fig. 16: Installed vacuum sensors of different manufacturers