Instruction Manual

ManualsBrandsMartin Christ ManualsEquipmentAlpha 1-2 LDplus

Freeze-dryer Alpha 1-2 LDplus

7 Malfunctions and error correction

Version 11/2006, Rev. 2.0 of 02/12/2014 • sb

Translation of the original operating manual

Fig. 41: Small flange and centring ring Fig. 42: Small flange with centring ring

and small flange

Fig. 43: Attaching the clamping ring Fig. 44: Tightened clamping ring

Pos: 147 /01 0 Uni v ersal mod ule/L eerz ei le @ 0\m od_ 120 211624 450 0_0. doc x @ 11 4 @ @ 1

Pos: 148 /20 0 Chri st/3 60 GT-BA Labo r-Pi lot (STAND ARD MODU LE)/0 70 Stö run gen und Fe hlers uche /070-0 010 -00 20-0020 B elüf tun gs- und Medi ena blaufv entil L Dpl us @ 31\ mo d_1 4084386 391 12_ 68.d ocx @ 209 718 @ 4 @ 1



7.1.2.2 Aeration and media drain valve

A malfunction of the aeration and media drain valve may have several

causes. One potential source are contaminants such as product residues

within the valve.

• Switch the freeze-dryer off and disconnect the mains plug.

• Clean the valve (see chapter 8.1.1.3 - "Aeration valve, media drain

valve").

• Put the freeze-dryer into operation again.

If there is still a leakage, the freeze-dryer must be checked by qualified

specialist personnel (see chapter 7.3 - "Service contact").

Pos: 149 /01 0 Uni v ersal mod ule/L eerz ei le @ 0\m od_ 120 211624 450 0_0. doc x @ 11 4 @ @ 1

Pos: 150 /20 0 Chri st/3 60 GT-BA Labo r-Pi lot (STAND ARD MODU LE)/0 70 Stö run gen und Fe hlers uche /07 0-0010 -00 20-0025 D ruc kste uerv entil @ 25\ mod_1 4049 840 63525_ 68.d ocx @ 184 209 @ 4 @ 1

