Manual

Status messages 23
Status messages
message reason

The heaters are Off, the unit is shut down.

The unit is heating up to operating te
m
perature.

T
h
e heate
r
is
a
t operating temperature, but Haze is not turned
on (RUN set to STBY or HAZE set to 0%).

T
h
e heater is
a
t operating temperature and the unit is under
DMX control.

T
h
e heater is in run mode and is producing haze.

The machine has detected an error with its calibration setting
s
and will not operate. Call Martin Service.

The machine has detected an error in the temperature sensor
and will not operate. Call Martin Service.

The machine is running a c
l
eaning cycle which lasts 45
seconds (number may be 45 to 0)
Resetting the machine after fluid out
If the machine runs out of fluid simply refill the fluid container and follow the
priming instructions on page 15.