Manual

18 DMX contro
l
DMX control
Overview
DMX is a digital control system widely used in entertainment and architectural
lighting. Any controller meeting the DMX-512 standard may be used to control
and program the haze output of the Jem Compact Hazer Pro™.
When a DMX signal is present, the Jem Compact Hazer Pro™ stand-
alone functions do not work. To fire the unit from the control panel or
remote control, the DMX controller must be powered off or
disconnected.
Connection
The Jem Compact Hazer Pro™ provides 5-pin XLR sockets on the rear panel of
the base for DMX connection.
For best results, use cable designed for high speed digital data transmission.
Suitable DMX cable is available from your Martin dealer.
DMX functions
The Jem Compact Hazer Pro™ address setting must match the DMX address
allocated to it on your controller. To set the address, see “Setting the DMX base
address” on page 14. The Jem Compact Hazer Pro™ requires three DMX
channels.
For example if the Jem Compact Hazer Pro™ is set to DMX address 100, channel
1 will be controlled by address 100, channel 2 will be controlled by address 101
and channel 3 by address 102.
When the machine is at running temperature and is under DMX control it displays
.
The functions of each DMX control channel are shown on the following page.