User manual

Onboard control menus 33
INFO
POWER ON
TIME
TOTAL X HOUR Display total hours of operation since manufacture
RESETTABLE X
HOUR
CLEAR COUNTER
→ YES/NO Reset counter to zero
POWER
CYCLES
TOTAL X Display total hours of operation since manufacture
RESETTABLE X CLEAR COUNTER
→ YES/NO Reset counter to zero
COLOR
SCROLLER
CONNECTED
YES/NO Display whether Atomic Colors scroller is
correctly connected
SW VERSION X.X.X Display current CPU firmware version
RDM UID 4D50:XXXXXXXX Display unique RDM ID
FAN SPEEDS
BASE FAN 1 X
RPM
Display current speed of base fan 1, NA, 0-10000 RPM
BASE FAN 2 X
RPM
Display current speed of base fan 2, NA, 0-10000 RPM
BASE FAN 3 X
RPM
Display current speed of base fan 3, NA, 0-10000 RPM
BASE FAN 4 X
RPM
Display current speed of base fan 4, NA, 0-10000 RPM
TEMPERATURES
USER INTERFACE
X C
CURRENT - MIN - MAX Display current, minimum or
maximum temperature in degrees Celsius since power
was last cycled off and on for user interface PCB
STROBE X C
CURRENT - MIN - MAX Display current, minimum or
maximum temperature in degrees Celsius since power
was last cycled off and on for strobe LEDs PCB
POWER UNIT X C
CURRENT - MIN - MAX Display current, minimum or
maximum temperature in degrees Celsius since power
was last cycled off and on for internal PSU
DMX LIVE
RATE XX Hz DMX transmission speed, live, in packets per second
QUALITY 0 - 100% Percentage of packets received with errors, live
STARTCODE 0 - 255 Decimal value of DMX start code, live
CHANNEL [Y]
X
[Y] 0 - 255
Scrolls through DMX value received on each DMX
channel:
[Y] = DMX channel number in current DMX control mode,
X = DMX value received on that channel
TEST TEST LEDS
BEAM STATIC
Beam LEDs activated at low intensity for inspection
purposes
BEAM OFF Beam LEDs blacked out
BEAM STROBE Test Beam LEDs only
RED AURA Test red Aura LEDs only
BLUE AURA Test blue Aura LEDs only
GREEN AURA Test green Aura LEDs only
MANUAL
CONTROL
RESET Reset fixture
CHANNEL [Y] X Send DMX value X on channel [Y]
SERVICE
ERROR LIST Displays any active errors
FAN CLEAN OFF/ON Stops and starts fan self-cleaning
USB
NO DEVICE / 1.x etc. Scrolls through valid software
versions found on memory device at USB port
Menu Item Options Notes
Table 6: Control menu