User manual

26 Atomic 3000 LED user manual
Fixture readouts
See also “Fixture information readouts” on page 19.
DMX input signal
The DMX LIVE menu lets you view the DMX values received on each channel in the mode it is currently set
to. If the fixture does not behave as expected, reading the DMX values can help you troubleshoot the
problem.
Fixture status
The Atomic 3000 LED gives fixture status readouts in the INFORMATION menu:
• Power on hours. You can view the number of hours since the resettable counter was last reset or the total
number of hours since manufacture. You can also reset the resettable counter to zero.
• Power cycles. You can view the number of times power has been cycled on and off since the resettable
counter was last reset or the total number of power cycles since manufacture. You can also reset the
resettable counter to zero.
• Color scroller connection. This readout lets you check whether an Atomic Colors scroller unit has been
correctly connected and recognized by the fixture.
• Current fixture software version information.
•The fixture’s RDM ID number.
• Current fan speeds for each of the fixture’s cooling fans.
• Temperature readouts from the fixture’s PCBs. In each case, you can view the current temperature and
the maximum temperature reached since power was applied to the fixture.
Display messages
If an error occurs, the Atomic 3000 LED gives fixture status readouts in the display. See “Service and
display messages” on page 34.