Specifications

W8L

W8LC

W8LM

5.5.4 Entering venue data

Choose metric or imperial units using the Units box on the Venue page.

Click on the button adjacent to the units that you would like to use.

Note: if you enter dimensions in one unit system and then click on the button of the

other system all dimensions will be converted, i.e. 1m will become 3.28ft.

PLEASE NOTE!

ViewPoint

is designed as a line array design aid. It does not claim to be a high

resolution drawing programme.

It indicates optimum line array curvature based on simple audience dimensions that

may be gathered from basic venue drawings or from a quick on-site survey.

For best results, planes should be used as follows:

Plane 1 is used to simulate the main floor area from the stage to a rear bleacher or

boundary.

Plane 2 is used to simulate any audience continuation behind Plane 1 (e.g. a rear

bleacher) from the end of the main floor to furthest and highest seat below Plane 3.

Plane 3 is used to simulate the furthest/highest audience area.

Example:

Plane 1, plane 2 and plane 3 decisions

CONTENTS

GUIDES

ENGLISH ONLY