Specifications

Note that it is important to keep the subwoofers tightly packed to avoid polar

anomolies caused by spacing.

Procedure

The normal procedure is to measure the angle from the top of the vertical subwoofer

stack to the highest/most distant seats (using an inclinometer) and to calculate the

required delay increment with the formula shown.

Example

We wish to project bass/mid-bass punch to stadium balcony seats 30º higher than the

top of our WSX stacks.

The WSXs are 572mm wide giving a centre-to-centre spacing of 0.572m.

MARTIN AUDIO - APPLICATIONS GUIDE, WAVEFRONT COMPACT SERIES

CONTENTS

GUIDES

ENGLISH ONLY