Specifications

14 TECHNICAL SPECIFICATIONS
MA2.8
INPUT IMPEDANCE 20kohms (balanced) 10kohms single ended
GAIN SELECT SWITCH 38dB (I/P sens 0.775V), 32dB (I/P sens 1.55V)
CMRR@1kHz >50dB
OUTPUT IMPEDANCE@1kHz 0.06 ohms
POWER BANDWIDTH 10Hz - 20kHz
SLEW RATE 20V/us
HUM/NOISE <-105dB
CHANNEL SEPARATION 1kHz - 90dB
10kHz - 80dB
MAINS OPERATING VOLTAGE 120 - 270 (minimum start voltage 190) full
output power maintained 180 - 280V.
Optional (65 - 135V) operation.
PROTECTION DC, High temperature, Turn on, VHF, Over and
under voltage, Clip Limiters. Short circuit.
DISTORTION
THD 20Hz - 20kHz and 1W - 1000W 4 ohms 0.08%
THD at 1kHz and 1100W 4 ohms 0.03%
DIM 30 at 500W 4 ohms 0.02%
CCIF (13 and14 kHz) at 500W 4 ohms 0.03%
SMPTE (60Hz and 7kHz) at 500W 4 ohms 0.08%
POWER MATRIX
MLS SWITCH SETTING
LOAD CONFIGURATION -5dB -4dB -2dB 0dB
16 ohms Stereo (2 channel) 160W 180W 340W 520W
8 ohms Stereo (2 channel) 300W 350W 650W 1100W
4 ohms Stereo (2 channel) 570W 680W 1100W 1400W
1900W[2]
2 ohms Stereo (2 channel) 1040W 1200W 1200W 1400W[1]
1400W[2] 2900W[2]
16 ohms Bridged mono 600W 700W 1300W 2000W
8 ohms Bridged mono 1200W 1400W 2200W 2800W
4 ohms Bridged mono 2100W 2400W 2400W 2800W
[1] = Component tolerance dependent.
[2] = Continuous power, one channel driven or peak power both channels driven.
Thermal protection may occur at high continuous power.
Power in watts (E1A 1kHz, 1% THD).
DIMENSIONS (W) 483mm x (H) 88mm x (D) 347mm
(W) 19ins x (H) 3.5ins x (D) 13.7ins
WEIGHT 10Kg (22lbs)
SHIPPING DIMENSIONS (W) 560mm x (H) 190mm x (D) 500mm
(W) 22.4ins x (H) 7.6ins x (D) 20ins
SHIPPING WEIGHT 12Kg (26.4lbs)
Martin Audio – MA2.8 Power Amplifier
ENGLISH
25
<
>
PRINT
GUIDES
CONTENTS
APPLICATIONS GUIDE