Specifications

[1] Component tolerance dependent.
Table 2.
[2] Continuous power, one channel driven or peak power both channels driven.
(Thermal protection may occur at high continuous power).
Power in watts (EIA 1kHz,1% THD).
Table 3.
MLS™ positions can be different for each channel and a variety of
combinations can be achieved see Table 3.
The way to find the best MLS™ position for your application is by
experimentation using table 3 for initial starting positions. The amplifier is
very well protected (even down to 0.3 ohms).
The MA2.8 amplifier is a power converter and when you select MLS™
positions you are allocating a portion of power from 3000 watts.
Martin Audio – MA2.8 Power Amplifier
ENGLISH
12
MA2.8 MLS Switch Position
LOAD CONFIGURATION -5dB -4dB -2dB 0dB
16 ohms Stereo (2 channel) 160W 180W 340W 520W
8 ohms Stereo (2 channel) 300W 350W 650W 1100W
4 ohms Stereo (2 channel) 570W 680W 1100W 1400W
1900W[2]
2 ohms Stereo (2 channel) 1040W 1200W 1200W 1400W[1]
1400W[2] 2900W[2]
16 ohms Bridged mono 600W 700W 1300W 2000W
8 ohms Bridged mono 1200W 1400W 2200W 2800W
4 ohms Bridged mono 2100W 2400W 2400W 2800W
Channel Impedance MLS Power Comments
A 8 -2dB 650W Power
B 8 -2dB 650W reduction
A 4 0dB 1900W High peak
B 4 0dB 1900W power
A 8 0dB 1100W Power
B 2 -4dB 1200W matching
A 8 -2dB 650W Power
B 4 0dB 1900W sharing
<
>
PRINT
GUIDES
CONTENTS
APPLICATIONS GUIDE