Technical data

Audio Equipment FOH Speakers
FBT Mitus 212FSA
1200W - 138dB SPL Processed Flyable Active Subwoofer
- Compact vented band pass subwoofer sharing the same width and hardware suspension of
the MITUS 206LA
- 320 mm (2 x 12’’) B&C neodymium magnet high excursion subwoofers with 75 mm (3’’)
voice coils; Switch mode power supply
- Frequency Response from 45Hz to 120Hz; Class D amplifier delivering 1200WRMS
- DSP with 8 presets, cardioid and infra configurations, delay
- Control panel with XLR input and link, volume, presets, delay, phase 0°-180°, ground-lift
- 15 mm (5/8’’) birch plywood enclosure, scratch resistant black paint
- Low frequency extension cabinet for the MITUS 206LA line array for flying or ground stacked
configurations.
- M20 top mount stand socket; Weight: (ex. wheelboard): 85kg (187lbs)
FBT Mitus 118SA
1200W - 139dB SPL Processed Active Subwoofer
- Compact vented band pass subwoofer design enclosure
- 460 mm (18’’) custom B&C neodymium magnet high excursion woofer with 75 mm (3’’)
voice coil; Frequency response from 36Hz to 100Hz
- Class D amplifier delivering 1200WRMS; Switch mode power supply
- DSP with 8 presets, cardioids and infra configurations, delay
- Control panel with XLR input and link, volume, presets, delay, phase 0°-180°, groundlift
- 18 mm (3/4’’) birch plywood enclosure, scratch resistant black paint
- Eight M10 fly points, M20 top mount stand socket and two FBT design aluminum handles
- Optional 4 swivel-mount casters 80 mm (3.15’’) on request
206LA line array for ground stack applications with optional MTB206 metal base
FBT Mitus 115A
1200W - 139dB SPL Processed Active Subwoofer
- Compact vented band pass subwoofer design enclosure
- 460 mm (18’’) custom B&C neodymium magnet high excursion woofer with 75 mm (3’’)
voice coil; Frequency response from 36Hz to 100Hz
- Class D amplifier delivering 1200WRMS; Switch mode power supply
- DSP with 8 presets, cardioids and infra configurations, delay
- Control panel with XLR input and link, volume, presets, delay, phase 0°-180°, groundlift
- 18 mm (3/4’’) birch plywood enclosure, scratch resistant black paint
- Eight M10 fly points, M20 top mount stand socket and two FBT design aluminum handles
- Optional 4 swivel-mount casters 80 mm (3.15’’) on request
206LA line array for ground stack applications with optional MTB206 metal base
FBT Mitus 206LA
600W + 300W - 134dB SPL Active precision coverage vertical array
FEATURES:
- 2 x 6.5’’ (165 mm) B&C neodymium woofers with 1.7’’ (44 mm) coil
- 1.4’’ (36 mm) exit B&C neodymium driver with 2.5’’ (64 mm) coil
- Frequency response from 68Hz to 20KHz
- Latest class D built-in amplifiers, 600Wrms to the LF and 300Wrms to the HF
with switch mode power supply
- DSP on-board with 8 presets, +/- 5db HF level control for accurate amplitude
shading
- Control panel with XLR input and link, volume, presets, HF level, HP-filter, ground-lift
- 100° horizontal waveguide with very low distortion and near flat wavefront up to 18Khz
- High impact polypropylene gas-injected enclosure withintegrated rigging hardwaread-
justable with 0° to 10°angle between cabinets at2° step
- Ideal for small to medium sized application, from single pole mounted loudspeakers
with 100°H x 10°V coverage