Manual

10
Single Cams That Use F Modules
 MartinSingleCamsystemsfeatureamodulardrawlengthadjustment.Aseriesofdraw
lengthmodulesareusedtoadjustdrawlengthinone-inchincrements(seebelow).Draw
lengthscanalsobeadjustedinhalf-inchincrementswithineachsizemodule.
PartsOfTheSingleCamSystems
SpeedBearing
AdjustingTheSingleCamDrawLength
Usingdrawlengthmodules,thedrawlengthcanbeadjustedin1"increments.Tochange
thedrawlength,replacethemoduleonthecambyremovingthescrewsthatholdittothe
cam. NOTE: do not draw your bow without the module installed. It will damage your
harness.
ThemodulesizesrangefromF-1toF-7.Asthemodulenumbersgethigher,thedrawgetslon-
ger.Thedrawlengthcanalsobeadjustedin1/2"incrementsusingthepegsonthebackofthecam.
 ThismethodofdrawadjustmentappliestotheMartinAcu-Trak,Fuzion,Dyna,M-Pro,and
M2SingleCamSystem.
Module
Screws
Bottom Cam
IdlerWheel
SingleCamStringDiagram
 ThestringharnessonyourSingleCamisinstalledaccordingtothediagrambelow.Your
stringharnessshouldbeinstalledbyyourqualiedMartindealer.
Module
Draw
Stop
ReturnCablePeg
SpeedBearing
Shooting
String
2ndhalf
Shooting
String
Split
String