iOS User Manual

connect”!toggle button to “ON”.
• After a moment, a 6-digit number will appear on your watch. Type the
number into the!screen that pops up on your device and tap “Pair”.
• If pairing is successful, “Paired to Smart” will appear on the watch’s OLED
display, and!“Watch and app are connected” will show on the App as seen
in the image on the right.
!
!
Note: If pairing is not successful, turn watch off and back on, turn your
device’s Bluetooth off and back on, then start again at item 3 above.
TOP
UN-PAIRING MARTIAN NOTIFIER
Your Martian Notifier can only be paired with one device at a time.
Once paired, if you wish to use your watch with a different device, you need
to un-pair it from the current device before pairing with the next device.
• Go to Settings/Bluetooth/Martian Notifier/“Forget Device”
TOP
RANGE/DISCONNECTED & RE-
CONNECTING
The “connected” range of the Martian Notifier to your device is approximately
30 feet/10 meters but the distance may vary depending on your location,