iOS User Manual

This screen allows you to set two items that will show on your watch OLED
display when you press the bottom button on your watch to view the Status
Bar. Your phone’s Location Services must be “on” for these items to display
on your watch. To turn on Location Settings in your phone:
• Go to Settings/Privacy/Location Services/Toggle both Location Services
AND Martian Notifier to “ON”
World Clock – This feature pushes accurate time for any world time zone to
the watch OLED display. It is viewed as the first screen when the Status Bar
is initiated with a single lower button press. You can choose “Local Time”
and the App will automatically choose the city closest to you that is in the
same time zone. In this setting, when you land in a new time zone, the
digital readout will change to the local time. Or you can also manually
choose a city and the display will show the time in that city at all times. To
engage, toggle World Clock to “ON”.
Current Weather – This feature pushes the current local weather conditions
to the watch OLED display. It is viewed as the fourth screen when the Status
Bar is initiated with a single lower button press. The App will show you the
area for which it is showing the weather. If no area is showing, please see
above to turn Location Services on your device to “ON”. You can change
between Fahrenheit and Celsius by tapping on “Choose scale”. The first time
you turn Weather “ON”, it may take 1-2 minutes to show on the watch. If you
are not in an area where your phone can provide your GPS location to the
Martian Notifier App (e.g. inside a building), Weather will not appear the first
time until you move to a place where GPS can find your location.
!