iOS User Manual

1:35, 2:35, 3:35, etc).
Active from – Choose the time when you want the repeater to begin.
Active to – Choose the time when you want the repeater to end (note: if you
choose “35” and a 6:00pm end time, your last alert will be at 5:35pm).
Label – Tap to give your repeater a name that will display on your watch’s
display screen, such as “Break Time”.
Tap “Save” to save to return to the Home screen.
Silent Alarms – You can create up to 5 silent alarms, each with its own
label, and you can set a separate!vibration
intensity level for alarms-only
via a slide control. Uses include a personal morning wake-up without!waking
anyone else,or to just give you a nudge reminder at a given point!in time. For
example, a student might!set a silent alarm to let them know!when there are
10 minutes left in a test, a presenter may set one for 5!minutes!before a
speech is to end, or a commuter 10 minutes before their train is to reach its
station. You can set an alarm!to repeat on given days, if desired.
Alarms are turned off in one of two ways. The standard method is a long-
press!of the top button. But you can also require disarming from the phone,
which!is useful for heavy sleepers. The Disarm command is located on the
Home tab!in the Martian App. In either disarm mode, pressing any button
will “snooze”!the alarm for 5 minutes (NOTE: if you press “snooze”,
notifications will not!come through until you turn the alarm “OFF”).
To set a Silent Alarm:
• Go to Martian App/Home tab/Silent Alarms
• Tap on the > to view options.