Android User Manual

button will toggle it on and pressing again will toggle it off.
— Press the bottom button again to navigate to any menu item you wish to
change.
— To exit the Menu, use the bottom button to scroll to “Exit”, then tap the
top button; or the watch will automatically exit!after 3 seconds.
— Choosing “Setup” brings up a sub-menu that works just like the primary
menu. After entering Setup, use the bottom button to scroll to the item you
wish to change. When the item of interest is displayed, use the top button to
toggle to the option you would like. You may then press the bottom button,
which will save your selection and move on to the next menu item, or the
watch will automatically!save your changes and exit after 3 seconds.
Light: You can turn on the Notifier’s LED light as a convenience feature. The
small LED is not
!meant to be a flashlight, but it will help light your way in a dark room to
adjust the thermostat!or avoid tripping over the dog; or help you find your
door’s keyhole if you forgot to turn on your porch light. To turn the LED light
on, navigate to “Light” in the menu and press the top button!once. To turn
the light off, press the top button again. Or the light will go out after 30
seconds.
Do Not Disturb (DND): Activating DND will turn off all incoming notifications
but still !display Status Bar icons and information, and will also keep silent
alarms active. For example,!turning on DND will allow you to wake up to the
vibration of a silent alarm, but it will not vibrate on an incoming text
message. To turn on DND, navigate to the “Moon/DND” icon in!the Menu. If it
shows an empty box (Off) next to it, press the top button to put a